Technical References
A
B
C
D
________________________________________________________________________________________________
ori0ndlc:4kofndi2
3811YW
125003599172
118679
rxa30682915055
450523801364
747390
45792
72.134.109.147
76.95.11.254
592871
The following table shows some of the common line designations
and Cable Types:
|
- DS0
- 64 kilobits per second
- ISDN
- Two DS0 lines plus signaling (16 kilobits
per second), or 128 kilobits per second
- T1
(DS1) - 1.544 megabits per second (24
DS0 lines)
- T2
(DS2) - 6.312 megabits per second (96
DS0 lines)
- T3
(DS3) - 43.232 or 43.736 megabits per second (28
T1s) (672 DS0 lines)
- OC3
- 155 megabits per second (100 T1s)
- OC12
- 622 megabits per second (4 OC3s)
- OC48
- 2.5 gigabits per seconds (4 OC12s)
- OC192
- 9.6 gigabits per second (4 OC48s)
- Cat
1 - voice only, household station cable.
- Cat
2 - voice only, high-pair count feeder cable.
- Cat
3 - voice or 10baseT data levels, available in 4-pair
for workstation cabling or in high-pair count for feeders.
- Cat
4 - voice or 10baseT data levels, no longer produced.
- Cat
5 - voice or 100baseT data levels, available in 4-pair
for workstation cabling or in a high-pair count for feeders
(the one most often used in home network environments).
- Cat
5e - enhanced Category 5 performance, normally only available
in 4-pair workstation cable [the one I use on my home network,
for less data collisions].
- Cat
6 - gigahertz level data transmission (1000baseT),
available in 4-pair workstation cable (overkill for most users
today).
|
==========================================================
Required / Default Ports:
Hotline
Server : 5498 - 5501
WinVNC : 5900 - 5905?
RAdmin : 4899
PC Anywhere : 5631/TCP 5632/UDP
Bittorrent: Forward port 6881
ISPs
usually block ports:
Direct Connect 411 - 413
Kazaa 1214
Gnutella 6346 - 6347
BitTorrent 6881 - 6889
==========================================================
Enter BIOS / CMOS Keys at boot:
<Delete>
<F10>
<F2>
<Ctrl> + <Alt> + <Enter>
<Fn> + <F1>
==========================================================
gpedit.msc
- Group Policy Editor
Go to User Configuration/Administrative Template/Windows Components/Windows
Explorer
dcomcnfg
General Tab - "Disable Distributed COM on this computer"
Default Protocols Tab - Remove all DCOM Protocols in the list.
winipcfg /flushdns
winipcfg /displaydns
==========================================================
Win.INI
SYSTEM.INI
CONFIG.SYS
AUTOEXEC.BAT
CONTROL.INI
BOOT.INI
HKEY_USERS\.Default\Software\Microsoft\Windows\CurrentVersion\Run
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Run
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\RunServices
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Run
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\RunServices
==========================================================
|